DELTA DORE TYBOX 817- 827 W RF User Manual

TYBOX 817- 827 W RF
1 and 2-channel wireless programmers
with built-in thermostat
User guide
Delta Dore hereby declares that the equipment complies
with the essential requirements and other relevant provisions
of the R&TTE Directive 1999/5/EC.
The EC declaration of conformity for this equipment is available,
on request, from:
"Technical info" department
DELTA DORE - Bonnemain - 35270 Combourg (France)
Email: info.techniques@deltadore.com
Because of changes in standards and equipment, the characteristics given in the
text and the illustrations in this document are not binding unless confirmed.
4. Override
From the RUN mode, override enables:
- for the heating, modification of the temperature
setting (5°C to 30°C) until the next programme
change
- for the hot water, modification of the current
operation (ON/OFF) until the next programme
change
7. Programming the heating
Example: default programme applied from
Monday to Friday:
Period
1 2 3 4 5
20°C 20°C 20°C
18°C 18°C
16°C
12.00 6.00 8.00 11.00 1.00
5.00
AM AM AM AM PM
PM
The programme can be changed for each day.
A simplified programme can be applied
(2 programmable periods) for a set number of days
(ONCE mode).
• Carefully read these instructions prior to use.
• Do not attempt to repair the unit yourself;
an after-sales service is available.
3. Choosing the operating mode
Select the mode
by pressing
1
repeatedly.
Constant
MAN
temperature setting
OFF Frost Protection
AUTO Follows the programming
Follows the ONCE programme.
ONCE Return to AUTO mode at the end of the
countdown.
ON /
• Override is only accessible in AUTO or ONCE
mode.
• To cancel an active override, press the relevant
button ( or ) or turn the dial.
5°C
30°C
R
: back to previous
setting
6
16°C
11.00
PM
MON
Period
1 6
SUN
1. Presentation
• These instructions apply to both the TYBOX 817 WRF
and the TYBOX 827 WRF.
• The hot water mode (
TYBOX 827 WRF.
Stand-by
screen:
• Room
temperature
• Current day
and time
On the receiver:
- the green LED indicates that the product is
switched on,
- the red LED indicates the status of the output(s):
light on = ON, light off = OFF.
MAN Mode
ONCE Mode
or
Heating
/
Off
Hot water
Permanent ON
5. Information button
Heating channel
status until ...
Hot water channel status
until ...
Current date and
number of days before
service.
Periods 2 to 5 can be disabled.
For example, inhibition of the midday slot
(periods 3 and 4).
16°C
12.00
AM
5°C
HH:MM
30°C
To copy the
programming from one
R
: back to previous
day to the next day.
setting
2. RUN Mode
Press a button to "activate" the display.
) is only available on the
Heating
and
hot water
modes
Room
Change mode
temperature
buttons
General mode active
Selector dial
Configuration
Time setting
Operating mode
MODE
selection
Run the operating
RUN
mode selected
Turn the dial to exit the
5°C
setting mode.
30°C
R
: back to previous
setting
PERM
365
001
ONCE mode
end day
6. Date / Time
R
: back to previous
setting
Period
1 2 3 4 5 6
20°C 20°C
18°C 18°C
16°C
To cancel the inhibition, press the
6.00 8.00 11.00 1.00 11.00
5.00
again and hold for 2 seconds.
AM AM AM PM PM
PM
Copy MON ... TUE ...
> 2"
Override
Time
currently active
Override
buttons
Information
button
Absence mode
Heating
CH
programming
Hot water
HW
programming
30°C 30°C
5°C 5°C
Automatic exit after 30 seconds
if no buttons are pressed and
the dial is not turned.
2
DD.MM.YY
PM
1 3 11.59
(23.59)
AM
12.00
(00.00)
4
> 2"
R
button