Advertisement
8. Programming the hot water channel
Example: default programme applied from
Monday to Friday:
ON
OFF
ON
OFF
ON
1
1
2
2
3
12.00
6.00
8.00
11.00
1.00
5.00
AM
AM
AM
AM
PM
PM
The programme can be changed for each day.
A simplified programme can be applied
(2 programmable periods) for a set number of days
(ONCE mode).
9. Absence mode
Number
of days of
absence
11. Basic configurations (menu 1)
1
2
Modification of programme
and temperature settings
User
(from 5 °C to 30 °C)
modification
authorised (default)
authorisation
Modification of
programme not authorised and
temperature settings restricted
(19 °C +/- 3 °C)
12. Replacing the batteries
Battery level symbol
The batteries need changing when the battery level
symbol appears (2 LR03 or AAA 1.5V alkaline
batteries).
Precautions must be taken:
- You have approximately 30 seconds to change the
batteries before the time is reset to zero (if this
happens, reset the time).
- Ensure that the +/- polarities are correctly placed
when the battery is fitted into the unit.
- Do not dispose of used batteries in unauthorised
places (you should respect the environment by
taking the batteries to a suitable collection site).
- Do not recharge them.
OFF
3
11.00
PM
MON
On/Off
1
3
SUN
PERM
365
15°C
001
5°C
Return
day
R
: back to previous
setting
> 5"
3
12-hour clock (default)
Time
display
24-hour clock
selection
Not authorised
Automatic
summer/winter
Authorised (by default)
mode
authorisation
1
Separate the thermostat
from its base unit
2
Replace the batteries,
taking care to properly align the poles
3
4
Lock the thermostat
Place the thermostat
on its base unit
ON/OFF periods 2 and 3 can be disabled.
For example, inhibition of the midday slot (ON and
OFF period 2).
12.00
AM
HH:MM
To copy the
programming from one
R
: back to previous
day to the next day.
setting
The countdown
begins.
Return to RUN mode
at the end of the
countdown.
0
1
4
ONCE
programme
start time
ONCE
programme
end time
13. Troubleshooting
Nothing is displayed on the room
unit screen.
There is no power supply.
Check the batteries .
The unit is in time setting mode.
You took too much time in changing the batteries.
Set the time. All the other settings have been kept.
The temperature displayed does not match
the temperature measured in the room
(thermometer).
Refer to the installation guide (menu 2-01).
The programme cannot be modified and the
temperature settings are limited (19 °C +/- 3 °C).
Refer to the Configuration section (menu 1-01).
"SERVICE DUE" is flashing on the display.
There are less than 30 days before the mandatory
service is due.
Contact your maintenance department.
ON
OFF
ON
OFF
ON
OFF
1
1
2
2
3
3
6.00
8.00
11.00
1.00
5.00
11.00
AM
AM
AM
PM
PM
PM
Copy MON ... TUE ...
> 2"
10. Compatible home automation options
You can associate your programmer with the
following options:
transmitter
associated
Opening
detector
Wireless
outdoor
sensor
12h
0
24h
1
5
6
Setting from 12 midnight to
12 noon
(default value: 07:00 AM)
Setting from 12 noon to
12 midnight
(default value: 11:00 PM)
"SERVICE DUE" is displayed on the unit.
The mandatory service date has passed.
The heating works on a set temperature setting
(override possible for 1 day).
The hot water will shut down (override possible for
2, 3 or 4 hours).
Contact your maintenance department.
The heating does not work according to the
required temperature.
If you have a Room Thermostat wired in series
with the programmer, check that this thermostat is
set to maximum.
Your heating system is in Frost-Protection
mode (temperature set in
The dial is still in
> 2"
R
To cancel the inhibition, press the
button
again and hold for 2 seconds.
Type of
Resulting function
"Waste prevention" function
Heating switches to Frost Protection
mode when a window is opened
(temperature set in
mode).
Indication of outside
temperature by consulting the
i
information menu (
button).
For information about associating and
using home automation products,
contact:
"Technical info" department
DELTA DORE - Bonnemain
35270 Combourg (France)
Email: info.techniques@deltadore.com
HH:MM
HH:MM
7
8
9
mode).
position,
,
, CH or HW
.
Advertisement
