Display Panel Cable - HP Pro Tablet 610 Maintenance And Service Manual

Display panel cable

Description
Display panel cable
Before removing the display panel cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
then remove the following components:
a.
Volume button board (see
b.
Audio board (see
c.
Battery (see
d.
SIM/card reader board (see
Remove the display panel cable:
1. Release the ZIF connector (1) to which the display panel cable is attached, and then disconnect
the display panel cable from the system board.
2. Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect
the display panel cable from the display assembly.
40 Chapter 5 Removal and replacement procedures
Back cover on page
Volume button board on page
Audio board on page
Battery on page 33)
SIM/card reader board on page
20).
Power button board on page
23)
30)
37)
Spare part number
739817-001
22), and