Setting 2-Color Printing (Mode B004); Master Resets - Acroprint ATR120 User Manual

11. Setting 2-Color Printing (Mode b004)

You can program up to 24 Color Changes.
Example: the clock can be set to print punches
in red if they fall outside normal working hours,
ie, early or late punches.
Press Enter to enter Color Change# 01.
+ –
Press or to edit the Hour.
Press Enter to set the Hour.
+ –
Press or to edit the Minute.
Press Enter to set the Minute.
Press Clear to set the color change for every day of the week
(by default the color change is set for all week days & the weekend)
and advance to the next color change#.
or
–
Press to cancel selected (flashing) day (press "Enter" to
continue advancing through each day of the week).
Press + to add a day that has been deleted.
Note: all odd# color changes will set
To exit programming mode slide the switch on the back of the clock to "Run".

12. Master Resets

Press + & Clear
clock settings back to their original (factory) defaults. This will not reset the Clock Password or any Alarm,
Column Shift Change or Color Change schedules. See Section 4 "Menu Trees - Quick Reference" to view
the factory defaults for various settings.
–
Press & Clear & Mode
Color Change schedules.
Note: the "Reset" button on the back of the clock will re-start the clock (the equivalent of unplugging the
clock and plugging it back in). This is useful if the clock program locks up. It will not change any of the clock
settings back to factory defaults as long as the coin cell battery for memory backup is still good and
switched on (the On/Off switch on the back of the clock).
Red printing. All even# color changes will set Black printing.
& Mode (Keys 1, 5, 6) all together to reset the
(Keys 2, 5, 6) all together to remove all Alarm, Column Shift Change or
Program Mode b004
SUN MON TUE WED THU FRI SAT
Code Hour Min
- 19 -