Acroprint ATR 120 Quick Start Manual

For unpacking and inspection instructions, see Section II of the ATR120 User
Manual, page 2.
Getting Started
Installing the clock dial battery
To install the clock dial battery, the front cover must be removed. You will need a
Phillips screwdriver for this procedure. See Section IV in the user manual, pages 3 &
4.
Setting the ATR120
1. Plug the unit into the power outlet.
2. Place the clock in program mode.
• To place the clock in program mode, set the switch located on the back
of the clock from "NOR" to "PRO". The display should read 3-1
3. Programming the clock for weekly or bi-weekly pay period: If you are
programming for a weekly pay period proceed with the following steps.
If you are programming for bi-weekly pay period skip step 3 and go to
step 4.
• Press (
period has been selected.
• Select the setting code from below to determine which code you will be
entering. Note: You will need to select today, the actual day of the
week that you are setting the clock.
2-1 = Monday
2-2 = Tuesday
2-3 = Wednesday
2-4 = Thursday
2-5 = Friday
2-6 = Saturday
2-7 = Sunday
• Press (
• Press (
Skip to step 5 if you chose weekly pay period.
4. Program Clock for bi-weekly pay period:
• Press (
• Press (
pay period. (This means today, the actual day of the week you are
setting the clock, along with which week, the first or second week of
your current pay period.
3-1 = Monday of first pay period
3-2 = Tuesday of first pay period
All manuals and user guides at all-guides.com
ATR 120 Quick Start Guide
) until the display reads 2-1. This indicates a weekly pay
OUT
2
) until the correct code appears on the display.
IN
3
) to save your settings.
OUT
3
) twice, the display should read 1-31.
OUT
2
) to select the current day of week for the current week of the
IN
3