Da-Lite Large Advantage Specification Data

Large Advantage
Automatic Electric Projection Screen Model
SUGGESTED SPECIFICATIONS:
(H) x (W). The Advantage® Deluxe Screen shall have
two motors, one to operate door and one to operate screen. Door motor
electrically operated 120 volt (60 Hz) not more than 1.2 amp, mounted inside
the roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have pre-set but adjustable limit switches to
automatically stop fabric door in the open position. The roller to be of 1.6"
diameter aluminum. Screen motor is electrically operated 120 volt (60 Hz) not
more than 2.4 amp, mounted inside the roller, to be three wire with ground
quick reversal type, oiled for life, with automatic thermal overload cutout,
integral gears, capacitor and an electric brake to prevent coasting. To have pre-
set but adjustable limit switches to automatically stop picture surface in the
"up" and "down" positions. Rigid metal roller, to be at least 5¾" in diameter (on
screens 14' to 18' wide) or 7" in diameter (on screens where either height or
width equal or exceed 20'). Screen fabric to be flame retardant and mildew
resistant fiberglass with black masking borders standard. Bottom of fabric shall
Viewing Area (H x W)
In. Cm
123" x 164" 312 x 417
141" x 188" 358 x 478
159" x 212" 404 x 538
177" x 236" 450 x 599
Viewing Area (H x W)
In. Cm
106" x 188" 269 x 478
119" x 212" 302 x 538
133" x 236" 338 x 599
Viewing Area (H x W)
In. Cm
110" x 176" 279 x 447
117½" x 188" 283 x 478
Square Format Dimensions (Screens With ^ Have 2" Standard Black Drop at Top)
10'6" x 14'^
14' x 14'
12' x 16'^
16' x 16'
13'6" x 18'^
18' x 18'
15' x 20'^
20' x 20'
16'6" x 22'^
22' x 22'
18' x 24'^
Deluxe Electrol
®
projection screen(s),
Video (NTSC 4:3) Format Dimensions (2" Standard Black Drop at Top)
Nominal Diagonal
In.
210"
240"
265"
295"
HDTV (16:9) Format Dimensions (2" Standard Black Drop at Top)
Nominal Diagonal
In.
216"
243"
271"
Wide (16:10) Format Dimensions
Nominal Diagonal
In.
208"
222"
Viewing Area (H x W)
In. Cm
320 x 427
427 x 427
366 x 488
488 x 488
411 x 549
549 x 549
457 x 610
610 x 610
503 x 671
671 x 671
549 x 732
®
be formed into a pocket holding a metal rod with plastic caps. Case shall be a
white powder coated aluminum extrusion. Bottom of case to be self-trimming
with a built-in flange around the bottom of the case. A section of the bottom of
the case shall be a retractable aluminum door that opens and closes
automatically with the lowering and raising of the picture surface. The balance
of the bottom of the case shall be a second aluminum door with manual
opening to provide access. Junction box shall be internally integrated into the
housing making it possible to install the housing and wire to the building's
electrical system during construction. The junction box shall contain a quick
connect connector that is mounted in the housing for easy plug-in connection
to the motorized fabric and roller assembly. The motorized fabric and roller
assembly to be installed in the case at the factory or at a later time at the job
site. To be complete with integrated low voltage control unit and three position
control switch with cover plate. Suitable for use in environmental air space in
accordance with section 300-22 (c) of the National Electric Code, and sections
2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters' Laboratories.
Overall Length of Case*
Cm In.
533 183½"
610 207½"
673 231½"
749 255½"
Overall Length of Case*
Cm In.
549 207½"
617 231½"
688 255½"
Overall Length of Case*
Cm In.
528 195½"
564 207½"
Overall Length of Case*
In. Cm
183½" 466
183½" 466
207½" 527
207½" 527
231½" 588
231½" 588
255½" 649
255½" 649
279½" 710
279½" 710
303½" 771
SPECIFICATION DATA
Approx. Ship. Wt.
Cm Lbs.
466 587
527 662
588 738
649 847
Approx. Ship. Wt.
Cm Lbs.
527 651
588 724
649 830
Approx. Ship. Wt.
Cm Lbs.
497 631
527 662
Approx. Ship. Wt.
Lbs. Kg
588 266.7
599 271.7
663 300.7
671 304.4
738 334.8
757 343.4
847 384.2
871 395.1
929 421.4
958 434.5
1012 459.0
*Case length does not include flange
Kg
266.3
300.3
334.8
384.2
Kg
295.3
328.4
376.5
Kg
286.2
300.3