Download Print this page

Da-Lite Large Cosmopolitan Electrol Instruction Book

Hide thumbs Also See for Large Cosmopolitan Electrol:

Advertisement

Quick Links

INSTRUCTION BOOK FOR
Large Cosmopolitan
Electrol
®
®

Advertisement

loading

Summary of Contents for Da-Lite Large Cosmopolitan Electrol

  • Page 1 INSTRUCTION BOOK FOR Large Cosmopolitan Electrol ® ®...
  • Page 2: Important Safety Instructions

    Important Safety Instructions When using your video equipment, basic safety precautions should always be followed, including the following: Read and understand all instructions before using. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or To reduce the risk of electric shock, do not disassemble this injury to persons.
  • Page 3 Down This Switch Can Not be used with LVC. 240 VOLT WIRING DIAGRAM FOR STANDARD WALL SWITCH: Da-Lite offers two styles of 240 volt wall switches for standard operation. Please see wiring diagram in wall switch boxes included with screen.
  • Page 4 Screen Adjustment For Screens Without A Built-In Low Voltage Control Screen travel is stopped automatically in the down and up positions by the limit switches that are preset at the factory. No further adjustment is necessary. If you need to make minor stop position adjustments see the appropriate step below. Setting The Down Limit Position NOTE: One turn of the limit screw equals approximately 2"...
  • Page 5 Large Cosmopolitan Electrol Installation for 120V Screens with A Built-In Low Voltage Control ® ® 120V Wiring Diagram 3-conductor 20–24 gauge wire can be used in place of the IMPORTANT NOTE: The wall switch is REQUIRED to make any S T O supplied RJ-14 cable to connect the wall switch.
  • Page 6 Large Cosmopolitan Electrol Installation For 240V Screens ® ® With A Built-In Low Voltage Control Connect Supplied RJ9 Cable to Splitter 240V Wiring Diagram and Switch, or use 4 With Optional Built-In Cable Conductor to Optional IR and RF Low-Voltage Wall Switch Connect to Screw Low Voltage Control Remote Control...
  • Page 7 Screen Adjustment For 120V Screens With A Built-In Low Voltage Control Locate the wall switch and remove the cover plate from the button on front of switch. Press and hold until the desired travel 3-button wall switch and remove the switch from the junction box. position is reached.
  • Page 8: Troubleshooting

    Visit www.da-lite.com/products/product_videos.php to find installation and troubleshooting videos and tutorials. You will also find a link to Live Chat for interactive support and you can contact us by email at info@da-lite.com or by phone at (800) 622-3737 or (574) 267-8101 with any troubleshooting questions.
  • Page 12 OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137, Warsaw, IN 46581-0137, (574) 267-8101, (800) 622-3737.