Searching Routes; Reversing The Waypoints Order In A Route; Erasing Routes - Furuno GP-7000F Operator's Manual

5. ROUTE
5.8

Searching Routes

You can search for a route through the route list or on the plotter display.
Searching a route through the route list
1. Open the route list.
2. Rotate the [ENTER] knob to choose SEARCH at the bottom of screen.
3. Push the [ENTER] knob.
The NAME window appears.
4. Enter the route name you want to search.
You can change the digit by pressing the cursor pad (
5. Push the SAVE soft key.
The selected route name is shown at the top of the list.
6. Press the [CLEAR] key to close the menu.
Searching a route on the plotter display
1. Open the route list.
2. Press the cursor pad (
3. Rotate the [ENTER] knob to choose PLOT at the bottom of screen.
4. Push the [ENTER] knob.
The plotter display appears with the chosen route at the screen center.
5.9

Reversing the Waypoints Order in a Route

The order of waypoints in a route can be reversed as follows.
1. Open the route list.
2. Press the cursor pad (
3. Rotate the [ENTER] knob to choose REVERSE at the bottom of the screen.
4. Push the [ENTER] knob to reverse the waypoints order in the route.
5. Press the [CLEAR] key to close the list.
5.10

Erasing Routes

You can erase routes as follows:
1. Open the route list.
2. Press the cursor pad (
3. Rotate the [ENTER] knob to choose DELETE at the bottom of screen.
4. Press the [ENTER] knob twice to erase.
5. Press the [CLEAR] key to close the route list.
5-8
NAME
0001RT
Name window
) to choose the route desired.
) to choose the route desired.
) to choose the route you want to erase.
).