Waypoint, Route Format; External Event Format - Furuno GP-7000F Installation Manual

3.6

Waypoint, Route Format

You may transfer waypoint and route data to another GP-7000 series unit or a PC in Standard or
Furuno format, via the NMEA1 port, NMEA2 port or PC NMEA IN port.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose WPL/RTE FORMAT and then push the [ENTER] knob.
5. Choose Furuno or Standard as appropriate and then push the [ENTER] knob.
Standard: NMEA format WPL and RTE sentences are output when "SEND" is executed to
transfer waypoint list or route list.
Furuno: Furuno format WPL and RTE sentences are output when "SEND" is executed to
transfer waypoint list or route list. Waypoint color, shape and comment data are sent.
6. Press the [MENU] key to close the menu.
3.7

External Event Format

If the equipment is equipped with an external event switch you may choose what mark is inscribed
on the screen when the switch is pressed. For connection of an external event switch, see the in-
terconnection diagram.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose EXTERNAL EVENT and then push the [ENTER] knob.
5. Choose Off, WPT or MOB as appropriate and then push the [ENTER] knob.
Off: No event swith is connected.
WPT: Waypoint is registered at ship's position if the cursor is not displayed, or at cursor posi-
tion if the cursor is displayed.
MOB: MOB is registered at ship's position.
6. Press the [MENU] key to close the menu.
Standard
Furuno
Off
WPT
MOB
34