Anchor Alarm; Stw Alarm - Furuno GP-7000F Operator's Manual

7.5

Anchor Alarm

The anchor alarm informs you that your boat is moving when it should be at rest.
1. Open the ALARMS menu.
2. Rotate the [ENTER] knob to choose ANCHOR ALARM and the push the [ENTER]
knob.
3. Rotate the [ENTER] knob to choose "x.xx (value) nm" and then push the [ENTER]
knob.
4. Rotate the [ENTER] knob to enter value.
5. Push the SAVE soft key and [MENU] key in order to close the menu.
7.6

STW Alarm

The STW alarm warns you when your boat's speed is over the speed range set.
1. Open the ALARMS menu.
2. Rotate the [ENTER] knob to choose STW ALARMS and then push the [ENTER]
knob.
3. Confirm that the cursor is located at the top line and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose On and then push the [ENTER] knob.
5. Rotate the [ENTER] knob to choose Max, and then push the [ENTER] knob.
6. Rotate the [ENTER] knob to enter the value, and then press the SAVE soft key.
7. Rotate the [ENTER] knob to choose Min, and then push the [ENTER] knob.
8. Enter the value for Min, similar to how you did for Max.
9. Press the SAVE soft key and [MENU] key in order to close the menu.
Setting range
How the anchor watch alarm works
Off
Max
Min
Own ship's
position
Off
0.00 nm
+000.0 kt
+000.0 kt
7. ALARMS
: Alarm
7-5