Furuno GP-7000F Operator's Manual page 93

1. Press the [DISP] key to show the DISPLAY MODE menu.
DISPLAY MODE
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
2. Rotate the ENTER knob to choose the
3. Push the [ENTER] knob.
Selecting transmission frequency
The single frequency display shows either the 50k picture or 200k picture. To select
transmission frequency, do one of the following:
Using the soft key
Press the 50/200 kHz soft key to choose the frequency.
Through the menu
1. Press the [MENU] key to show the menu bar.
Menu Bar
GENERAL
2. Rotate the [ENTER] knob to choose SOUNDER and then push the [ENTER] knob
to show the SOUNDER menu.
Display mode menu
SOUNDER SENSITIVITY
Menu bar
10. VIDEO SOUNDER OPERATION
icon.
ALARMS RANGES
10-3