Erasing Route Waypoints - Furuno GP-80 Operator's Manual

ROUTE : 01 (In Use , REVERSE)
skip Distance
Trial Speed : Auto Man (012.0kt)
01
EN .
.
EN
02
34° 12.345' N 130° 23.456' E
001
MARINE POINT
36° 12.345' N 135° 23.456' E
002
A POINT
: RTE WPT
CLEAR: Delete
ENT: Enter MENU: Escape
Use: In use
Fwd: Traverse waypoints in forward order
Rvs: Traverse waypoints in reverse order
Figure 4-15 Route editing screen
5) If required, press
which to calculate time-to-go.
6) Press t or s to select Auto or Man.
Auto: Current average speed is used to
calculate the time-to-go. Manual: Entered
speed is used to calculate the time-to-go.
Enter speed and press
Route waypoints may be registered two ways:
entering waypoint number directly or through
the route editing screen. Follow 1 or 2 be-
low.
1 1 1 1 1 Entering waypoint number directly
7) Enter waypoint number, in three digits.
The cursor shifts to the "Skip" window.
The procedure for skipping a waypoint is
shown on page 5-4. For now, go to the
next step.
8) Press to continue. If the waypoint en-
tered in step 7 does not exist, you are in-
formed that the waypoint does not exist
and entry is cancelled.
9) Enter other route waypoints by repeating
steps 7 and 8.
10) Press [MENU ESC] to finish.
4 – 6
TTG
nm
D M H
nm
D M H
AUG 12' 95 12 : 35U
AUG 13' 95 13 : 45U
to enter the speed by
.
2 2 2 2 2 Using previously registered waypoints
Enter waypoints in the order they will be tra-
versed; not by waypoint number order.
Route
editing
screen
7) Press [
waypoint on route planing screen disap-
pears.
Waypoint
8) Press or
list
9) Press the [NU/CU ENT] key. Selected
waypoint number appears on the route
editing screen. The distance and time-to-
go indications to the first waypoint entered
are blank.
10) To enter other route waypoints, repeat
steps 8 and 9.
11) Press the [MENU ESC] key to finish.
Note: To return to the route editing screen,
press [
].

4.5 Erasing Route Waypoints

Route waypoints are mutually erased when
the navigators are sharing data.
1) Press [WPT RTE] and [5] to display the
route list.
2) Press or
3) Press s to display route editing screen.
4) Select the waypoint to erase.
5) Press the [CLEAR] key.
6) Press the [NU/CU ENT] key.
7) Repeat steps 2 through 4 to continue eras-
ing waypoints.
8) Press the [MENU ESC] key. The route is
rearranged to reflect the change.
]. The reverse video on the
to select waypoint number.
to select route.