Hands-Free Mode; Headset Mode - Aastra 7434ip User Manual

2.10
2.11
6/1553-DBC 434 01 Uen B6 2010-07-09
Handsfree Mode
In handsfree mode, you do not lift the handset to start a procedure, and
instead of replacing the handset when you end a call, you press the
Clear softkey or
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by pressing a line key.
This default setting is known as the loudspeaker preset mode. When you
dial a number without lifting the handset, the call is also connected to the
loudspeaker by default.
Answer a call
Make a call
Clear a call
Switch from handsfree
to handset
Switch from handset
to handsfree
Switch from handsfree
to headset
Switch from headset
to handsfree

Headset Mode

Using a headset allows you to make and receive calls without using the
handset.
Plug the headset cable to the connector marked
ready to use. If you are using a wireless headset, plug the radio base
cable to the connector marked
.
Press the line button that indicates an
incoming call (the button's indicator is
flashing) or press Answer.
Dial the number you want to call. When
someone answers, the speakerphone is
activated. Then you can pick up the
handset, or continue to use the
speakerphone.
Press the Clear softkey or
Lift the handset.
.
Press and replace the handset.
Press .
Press .
.
A 7434 D
ASTRA IP ESCRIPTION
.
, and the headset is
26