LifeSpan Traction II Owner's Manual page 7

STEP 1:
STEP 2:
TRACTION II
1. Open the box and put mainframe on the
floor;
2. With both hands holding the computer (18),
rotate the uprights (4L/4R) so it is aligned
with the arch pocket on mainframe (2) as
shown by the arrow
3. Use the M8*15 bolt (62) and washer (84) to
secure the uprights (4L/R) to the
mainframe (2)
4. Use the M4*15 bolt (91) to secure the
cover (22) to the mainframe (2)
5. Pull up (4L/4R), as shown by the arrow,
and rotate until it is aligned with the arch
pockets on uprights (4L/4R).
1. Use the M8*15 bolt (62) and washer (84) to
lock the computer (18) to the upright
(4L/4R).
7