Trouble Shooting Guide - LifeSpan Traction II Owner's Manual

Bolt
72
Bolt
73
13
Fault code Fault description
Abnormal communication
E01
with computer
No Speed Wireless
Sensor Network
E02
Abnormal communication
with computer and
controller after startup
TRACTION II
ST4.2*15
M5*10

. TROUBLE SHOOTING GUIDE

Fault processing
The machine cannot run, the computer shows fault code"E1",
and three "beeps" will sound.
Possible reasons: communication is obstructed between
controller and computer, please check the wire and make sure
the wire is connected well and is not damaged.
Computer displays shows fault code "E02" with other areas
blank. After 10 seconds machine will go into ready mode, and
can be restarted.
Possible Reasons: Can't receive motor speed sensor feedback
within 3 seconds, please check sensor plug, motor connection
wire and the controller.
The machine cannot run, the computer shows fault code "E02",
and three "beeps" will sound.
Possible reasons: communication is obstructed between
controller and computer, please check the wire and make sure
the wire is connected well and is not damaged.
34
7
27