Editing A Contact; Editing The Name - Aastra 7433ip User Manual

IP P MX-ONE™
HONE FOR
8.4
8.4.1
63
6. Press Done to save the number as one of your contacts.
Note: Numbers beginning with 0 are preceded by the digit or digits
required to reach an external line. The digits can also be stored
by adding the country code number after a plus sign, for example
+46 8 719 0000.

Editing a Contact

This section describes how to edit a contact from the phone. It is also
possible to edit a contact via the web interface, see 14.3.1 Contacts
Folder on page 94.
To edit a contact name or number, do the following:
1. Press .
2. Select a contact and press more....
3. Select Edit [selected contact], and press Select.
You can change the contact name, number, or ring melody.
4. Press more..., select what to edit, and press Select.
To edit the contact name, continue to 8.4.1 Editing the Name on
page 63.
To edit the contact number, continue to 8.4.2 Editing the Number
on page 64.
To edit the contact ring signal, continue to 8.4.3 Editing the Ring
Signal on page 64.
When entering a name by multi-tapping, the most common letters are
written above each key on the phone. To get the letter A press 2 once,
for B press 2 twice, to get C press 2 three times and so on.
Press * to switch between upper and lower case.
By default, the first character you enter is written in upper case, and the
rest of the word is written in lower case. Every new word starts with an
upper case character (that is, after an entered space).
You can select a different character set from Settings, see 13 Settings
on page 83.

Editing the Name

To edit a contact name, do the following:
1. Select Edit Name, and press Select.
6/1553-DBC 433 01 Uen B6 2010-07-09