Tones And Signals - Aastra 7433ip User Manual

IP P MX-ONE™
HONE FOR
2.7
2.7.1
2.7.1.1
2.7.1.2
21

Tones and Signals

It is possible to set different ring signals on the phone. For a description
on how to change signals, see 13.2.1 Ring Signals on page 84. To distin-
guish between different call types, that is, internal, external and callback
calls, the signal you choose is used with different ring cadences, see
2.7.1 Call Type Characteristics on page 21. It is also possible to distin-
guish between callers by assigning contacts their own ring signal, see
8.4 Editing a Contact on page 63.
Call Type Characteristics
The ring signal for incoming calls alert in three different ways depending
on the type of incoming call. The signals shown in this section are the
most used signals worldwide. Many markets use signals that are
adapted for the local standards. If you get a signal that is not described
or you cannot identify, ask the system administrator.
Note: At a second incoming call, the phone rings only the first period
and with a low level by default. The alerting type can be changed,
see 13.2.2 Alert Type on page 84. This is valid for both the
internal and external ring signal.
Internal ring signal
External ring signal
Recall signal (Callback reminder)
Ringing Volume
Use the Volume keys to adjust the ring volume. The new volume setting
is stored.
Note: The volume will return to the default level in case of a power
failure.
Mute Ring Signal
To suppress the ring signal for an incoming call, do the following:
6/1553-DBC 433 01 Uen B6 2010-07-09