Battery Installation - Cardinal HSDC series Operation Manual

Model Capacity
HSDC-200 200 lb
HSDC-100 100 lb
HSDC-40 40 lb
HSDC-20 20 lb
HSDC-500 500 lb
HSDC-100KG 100 kg
HSDC-40KG 40 kg
HSDC-20KG 20 kg
Before weighing operations can begin it will be necessary to install the batteries in the HSDC
hanging scale. This same procedure should also be followed when battery replacement becomes
necessary. Make certain that only "C" size alkaline batteries are used as replacements.
NOTE! Exposure of batteries to high temperatures (above 140
their capacity resulting in shorter operation time.
Step 1
Using a screwdriver, remove the two retaining screws from the back of the instrument. Remove the
battery compartment cover.
Step 2
Remove the old batteries, if present. Insert six new "C" cells making certain that each cell is
correctly positioned. Refer to the next diagram for proper battery placement.
SPECIFICATIONS, Cont.
Graduation
200 x 0.1 lb
99.95 x 0.05 lb
40 x 0.02 lb
20 x 0.01 lb
500 x 0.2 lb
99.95 x 0.05 kg
40 x 0.02 kg
20 x 0.01 kg

BATTERY INSTALLATION

2
°
F) will decrease
Battery Compartment
Cover
Remove these screws