Clearaudio Master Innovation User Manual page 8

Master Innovation
User manual (set-up)
Carton 1 of 3:
1)
First, take out the three black flat pads from the accessory bag. Place these flat pads on your
hi-fi rack or another suitable base, where the final position of your Master Innovation
turntable will be.
2)
Then take the Master Innovation turntable body (drive unit) from the next packaging layer
and place the turntable's spikes onto the flat pads.
Image 2: Master Innovation drive unit
3)
To avoid humming noises it may be necessary to ground the bearing. To do so, plug the
ground cable provided into the hole in the bearing fixing bolt on the underside of the
turntable.
Image 3: Grounding the bearing
4)
Remove the protective security tape from the bearing housing. Place two drops of synthetic
bearing oil onto the ceramic bearing shaft (provided, and also available at
www.analogshop.de).
Page 8  Clearaudio Electronic GmbH 2014