System Setup - OWC Mercury Elite-AL Pro Owner's Manual

System Setup:

Your Mercury Elite-AL Pro drive is simple to hook up to your
computer. Choose whichever interface you prefer to use, for best
performance use either the FireWire 800 ports or the eSATA pors.
Simply insert the interface cable (all types included with the
enclosure) to your computer.
Here are a few tips to get the most out of your new external
storage and expansion device:
• Do not place anything in front of your Mercury Elite-AL Pro that
would block airflow.
• Treat your Mercury Elite-AL Pro just like you treat your
computer- keep it dry, cool, and out of direct sunlight
• Always check any peripheral cable that you are going to use
with your Mercury Elite-AL Pro enclosure for damage before
hooking them up.