Removing Screws - OWC Mercury Elite-AL Pro Owner's Manual
External storage enclosure for 3.5" serial ata hard drive includes firewire 400, firewire 800, usb 2.0 and esata ports
Hide thumbs
Also See for Mercury Elite-AL Pro:
- Assembly manual (28 pages) ,
- Assembly instructions manual (22 pages) ,
- Owner's manual (20 pages)
Table of Contents
Advertisement
3. Remove the 4 screws from the back of the hard drive enclosure
using the included Torx T-10 screwdriver. The back cover will not
fully come off of the enclosure, it's attached by wires going to the
power switch.
4. Once the top cover is removed, set it aside, to expose the inter-
nal bay as shown.
Advertisement
Table of Contents
Need help?
Do you have a question about the Mercury Elite-AL Pro and is the answer not in the manual?