System Setup - OWC Mercury On-The-Go Pro Series Assembly Manual

OWC Mercury On-The-Go Pro

2 SYSTEM SETUP

This guide will get you up and running quickly, demonstrating how to install your own
2.5" hard drive into the OWC Mercury On-The-Go Pro enclosure.
Got tools?
If you don't have the tools necessary to complete this installation, Newer
Technology offers a fantastic toolkit with everything you need included to perform this
installation, and most common computer hardware installations.
It's available at:
http://www.macsales.com/tools
ATTENTION:
that is exposed on the bottom of the enclosure. This heatsink will become warm to the touch
during heavy usage. Use caution when picking the enclosure up.
Your computer is a static-sensitive device. It is susceptible to
invisible damage if not protected during installation.
We recommend proper grounding by using a grounding
strap. Make sure to work in a clean and static-free area, and
avoid wearing clothing that retains static charges.
For more information, please visit
http://www.macsales.com/static
The OWC Mercury On-The-Go Pro utilizes an integrated aluminum heatsink
Chapter 2 - System Setup