Disarming And Silencing Alarms - Honeywell ADEMCO VISTA-12A User Manual

Disarming and Silencing Alarms

• Security code + [1] OFF
Disarming
• The "READY" indicator lights if all zones are secure
• The keypad emits a single tone to confirm that the system is disarmed.
• Security code + [1] OFF
To Silence a
Burglary Alarm • The "READY" indicator lights if all zones are secure
• The keypad emits a single tone to confirm that the system is disarmed.
• Simply press the OFF key
To Silence a
• The "READY" indicator lights if all zones are secure
Fire Alarm
• The keypad emits a single tone to confirm that the system is disarmed.
• When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
Memory of
Alarm that caused the problem, and displays the type of alarm.
• To Clear Alarm Display and/or "Alarm Canceled" display: Security code + [1] OFF
again
• Note the zone in alarm on the keypad display, and make that zone intact (close door,
window, etc.).
• The message remains displayed even after disarming the system, but can be cleared with
another "disarm" sequence.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but CONTACT THE
POLICE from a nearby safe location.
If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will beep rapidly
upon your entering, indicating that an alarm has occurred during your absence.
LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location
– 8 –