Time And Date Functions - Honeywell ADEMCO VISTA-12A User Manual

Creating Schedules (cont'd)
11. Select the randomize option, if desired: 0 = no; 1 = yes
If selected, the schedule times will vary within 60 minutes of the "hour"
time. For example, if a schedule is set to start at 6:15, it will do so the first
time 6:15 arrives, but on subsequent days it will start anytime between
6:00 and 6:59
This feature is typically used for lighting control to make an unoccupied
facility appear occupied during extended absences.
Press [∗] to return to the ENTER SCHED No. prompt.
Child-Not-Home
Paging

Time and Date Functions

Viewing the Time
and Date
To Set the Time and
Date
– 16 –
• You can program a schedule that causes a pager report to be sent to Pager 1 phone
number if the system is not DISARMED by the scheduled time (see event "03"). The
message sent is:
7 7 7 – 7 7 7 7
For example, a working parent might want a message to be sent to a pager if their
child did not arrive home from school and disarm the system by a certain time.
NOTE: Your installer must program the control for pager reporting before you can use
the child-not-home scheduling option (installer must program pager number
and report options).
• Master Code+[#] + [6] [3], or if programmed, press the designated function key.
• The system lets you view its time and date setting.
• The display remains on for about 30 seconds.
• Master Code+[#] + [6] [3], then press [∗] while the time/date is displayed.
• A cursor appears under the first digit of the hour.
NOTE: To move cursor ahead, press [∗]. To go back, press [#].
• Enter the 2-digit hour setting; enter the 2-digit minute setting.
• Enter the last two digits of the current year.
• Enter the 2-digit month setting (01-12); enter the 2-digit day setting (01-31).
• Press [∗] to accept the settings and continue.
The Clock Adjustment prompt is displayed. This prompt lets you add or subtract up
to 59 seconds per day, if needed, to keep the real-time clock accurate.
• Press [0] to add seconds per day, or press [1] to subtract seconds per day.
• Enter the desired number of seconds per day (01-59) to add or subtract.
• Press [∗] to accept the settings and exit. This mode automatically exits after 10
seconds.
RANDOMIZE
0=NO 1=YES
.
X