Honeywell ADEMCO VISTA-12A User Manual page 12

Follow-Me Feature (cont'd)
• User code + [#] + [6] [1]
To enter a
follow-me • The first follow-me phone number (if one exists) is displayed:
phone number
• To display follow-me phone number 2, press [2]. To display follow-me phone number 3,
press [3].
• To modify the displayed number, do the following:
1. Press [∗], which clears the number.
2. Enter the desired phone number.
3. Press [∗] to save the new number.
– 12 –
FM Phone No.
18009216704--_
To include a 2-second pause in the number, press [#] at the point in the entry the pause
is desired (it displays as "–"). Pauses entered at the end of the number will allow dialing
but will delay the message tones by the amount of pause programmed.
The next follow-me phone number in sequential order (1-2-3-1 etc.) is displayed. Press
[∗] to program that number, or press [1], [2], or [3] to select the desired follow-me
number to be programmed.