Ricoh SP204SF User Manual page 24

1. Guide to the Machine
• With the Type 4, select [Wireless LAN] in [LAN Type] to establish the wireless LAN connection or
select [Ethernet] in [LAN Type] to establish the wired LAN connection.
• For details about configuring the IPv4 address, see the Software Installation Guide.
• The IP address can also be configured via Web Image Monitor. For details about configuring the
IP address, see page 137 "Using Web Image Monitor".
Setting the machine to receive an IPv6 address automatically
• A DHCP server is required on the network for the machine to receive an IPv6 address
automatically.
• Make sure [DHCPv6] is set to [Enable] in [IPv6] in Web Image Monitor. For information about how
to launch Web Image Monitor, see page 137 "Using Web Image Monitor".
1. Press the [User Tools] key.
2. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
With the Type 4, to establish the wireless LAN connection, select [Wi-Fi Settings] in [Network
Settings].
3. Press the [ ] or [ ] key to select [Machine IPv6 Address], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Use IPv6], and then press the [OK] key.
5. Make sure [Use IPv6] is set to [On].
After a setting has been changed, the machine automatically restarts. To skip the time to wait for the
machine to restart, press the [User Tools] key.
22
CTT129