Ricoh SP204SF User Manual page 150

8. Configuring the Machine Using Utilities
Item
Protocol, Active/
Inactive
Manager Address
Configuring the Administrator Password
Click [Administrator Settings] to specify the administrator password.
Administrator Settings
Item
Current Password
New Password
Confirm Password
Resetting the Machine's Settings
Click [Restore Defaults] to reset the settings and administrator password.
Checking the Machine Information
Click [Machine Information] to display machine information.
148
Configure settings for each protocol used by the community.
Enter the host computer's address according to the protocol in use.
Enter the current administrator password. The default is "admin133".
Enter the new administrator password. You can enter it using three to eight
characters.
Enter the same password again, to confirm.
Description
Description