Ricoh SP204SF User Manual page 135

• Link-local Address
Displays the IPv6 link local address.
• Stateless Address 0-4
Displays the IPv6 stateless addresses obtained from a Router Advertisement.
• Stateful Address
Displays the IPv6 stateful address.
• Manual Config. Add.
Specifies the machine's IPv6 address when DHCP is not used.
• IPv6 Gateway Address
Specifies the IPv6 address of the default gateway.
MAC Address
Displays the MAC address.
Wi-Fi Settings
Wi-Fi Connection
• Infrastructure Mode
Select this to specify the settings in Infrastructure mode.
• Search SSID
Select the wireless LAN access point or router identified by the SSID and enter the
password. If the password is correct, a network connection will be established.
• Enter SSID
Select this to manually specify the settings for the wireless LAN access point or
router.
• WPS (PBC)
WPS can be performed by push-button configuration (PBC).
• WPS (PIN)
WPS can be performed using the personal identification number (PIN).
• 802.11 Ad-Hoc Mode
Select this to specify the settings in Ad-hoc mode.
Machine IPv4 Address
You can configure the wireless LAN IP address.
• DHCP Activated
Sets the machine to receive its IPv4 address, subnet mask, and default gateway address
automatically from a DHCP server.
Network Settings
133