Current Production Models:
Current Production Models of Mid-Line Refrigerators are equipped with a rocker switch located at
the front of the light switch assembly.
1. Remove the screw from the bottom of the freezer light assembly. (Fig. 74) Drop the assem-
bly down to work on the components inside the assembly. The wiring harness will remain
attached at this point.
2. Slide the electrical shield from the back of the assembly.
3. The rocker switch and light socket can now be unsnapped from the freezer light assembly
and the wiring harness connectors can be removed from the switch and socket terminals.
FREEZER LIGHT ASSEMBLY
ROCKER SWITCH & WIRING
MID-LINE DESIGN
FREEZER LIGHT SOCKET & WIRING
ORANGE & BLACK WIRES
SHOWN ROTATED
90°
ELECTRICAL
SHIELD
FREEZER LIGHT
ASSEMBLY
WIRING HARNESS
CONNECTOR
(Behind Evaporator Cover)
Fig. 74
60
MOUNTING
SCREW
16 thru 22 cu. ft. Top-Mount