Whirlpool MULLION EVAPORATOR DESIGN User Manual page 28

Apartment maintenance series top-mount refrigerator/freezers
Table of Contents

Advertisement

Servicing the Defrost Heater
The defrost heater is located on the left side and bottom of the evaporator and is held in place by
two slotted retainers at the bottom of the evaporator.
1. Release the evaporator from its position by first pulling the two plastic retaining clips from
the bosses that secure the evaporator to the heat shield.
2. Gently pull the left end of the evaporator away from the heat shield. Be careful not to kink
the evaporator outlet tubing. (Fig. 33)
3. Gently slide the defrost heater by pulling it to the left and out of the retaining slots on the
evaporator. (Fig. 34)
4. Disconnect the defrost heater wire connector from the wiring harness plug.
OLD DESIGN
DEFROST
HEATER
Fig. 33
Fig. 34
22
PLASTIC
RETAINING
CLIPS
12 & 14 cu. ft. Top-Mount

Advertisement

Table of Contents
loading

This manual is also suitable for:

Old designMid-line designNew design

Table of Contents