REMOVING THE DUAL ELEMENT INFINITE SWITCH
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
CAUTION: When you work on the electric
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1.
Turn off the electrical supply going to the
range.
2.
Pull the knob off the dual element infinite
switch and remove the two screws.
3.
Pull the range away from the wall so that
you can access the rear panel.
4.
Remove the eight screws from the rear
panel and remove the panel (see step 4 on
page 3-2).
5.
Remove the wires from the dual element
infinite switch terminals and remove the
switch.
L1 - Black
Screws
4 - Or/Bk
Inner Element
3-4
Dual Element Infinite Switch
L2 - Red
P2
P1
2 - Violet
Pushbutton
S2 - Blue
Pilot Light
4A - Or/Wh
Outer Element