Led Indicators - D-Link xStack Hardware Installation Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch Hardware Installation Guide
Switching Capability
Priority Queues
MAC Address Table
Wire Speed
Physical Stacking
Virtual Stacking /
Clustering

LED Indicators

Location LED Indicative
Per Device Power
Console
RPS
Fan Err
Master
7-Segment LED
DGS-3120-24PC: 65.48 million packets per second.
DGS-3120-48TC: 101.19 million packets per second.
DGS-3120-48PC: 101.19 million packets per second.
DGS-3120-24TC: 88Gbps
DGS-3120-24SC: 88Gbps
DGS-3120-24SC-DC: 88Gbps
DGS-3120-24PC: 88Gbps
DGS-3120-48TC: 136Gbps
DGS-3120-48PC: 136Gbps
8 Priority Queues per port
Supports 16K MAC addresses
Full-wire speed (full-duplex) operation on all ports including Gigabit ports.
•
Two dedicated stacking ports in the rear panel of the Switch. Note: stacking
cable length 3 meter for stacking DGS-3120 Series use only.
•
Provides bi-directional redundant stacking topology.
•
Topologies: Linear and Ring.
•
Bandwidth: Up to 10G.
•
The FCS version supports 6 units per stack. Supports backup master.
•
Supports inter stacking trunking and mirroring.
•
Cannot stack EI and SI devices together.
•
Supports D-Link Single IP Management v1.6
•
Manages up to 32 devices in a virtual stack with a single IP address.
Color
Green
Green
Green
Red
Green
Green
Status Description
Solid Light Power On
Light off Power Off
Solid Light Console on
Light off Console off
Blinking When switch detects that RPS is connected
Solid Light RPS in using
Light off RPS off
Blinking When any of the fans has failed
Light off When all fans work normally
Solid Light When device is configured or selected to be a
stacking master
Light off When device is stacking slave
Capable 1 – 6, H, The box ID is assigned either by user (static
h, G mode) or by the system (automatic mode).
When the box become a primary master, the
7 segment works as bi-function. That is box
ID and "H" indicate as primary Master and the
display will be shown by turn. That is boxID -
> H -> boxID -> H
1-6: To indicate the stacking of the switch
34