Processor Upgrade - HP ProLiant ML350p Gen8 User Manual

For rack models, if removed, install the security bezel (on page 21).
o

Processor upgrade

WARNING:
internal system components to cool before touching them.
CAUTION:
configurations must contain processors with the same part number.
CAUTION:
heatsink is removed from the processor after it has been installed.
IMPORTANT:
To remove the component:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 21).
o
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 24).
o
Remove the access panel (on page 23).
5.
Remove the air baffle (on page 25).
6.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent possible server malfunction and damage to the equipment, multiprocessor
The heatsink thermal interface media is not reusable and must be replaced if the
Processor socket 1 must be populated at all times or the server does not function.
("Remove the tower bezel" on page 21).
Hardware options installation 53