IMPORTANT:
installing the processor.
To install a processor:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 21).
o
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 24).
o
Remove the access panel (on page 23).
5.
Remove the air baffle (on page 25).
6.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
7.
bracket.
If installing a processor with a faster speed, update the system ROM before
("Remove the tower
bezel" on page 21).
Hardware options installation 48