Remove The Rack Bezel - HP ProLiant ML350p Gen8 User Manual

Using the key provided with the server, unlock the bezel with a clockwise turn.
1.
Remove the tower bezel.
2.

Remove the rack bezel

If installed, remove the security bezel (on page 21).
1.
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 24).
4.
Remove the access panel (on page 23).
5.
Loosen the rack bezel thumbscrews located inside the chassis.
6.
Operations 22