Axis 560 User Manual page 46

Section 4: Setting Up - NetWare
46
Controlled Access
The Axis Gateway will appear in NetWare 5.1 and later releases.
To use the Axis Gateway with earlier versions of NetWare, you
can download the Axis Gateway Configuration utility from
www.axis.com.
To print using TCP/IP, Axis print server firmware 6.1 or later is
required. In order to print using IPX/SPX, Axis print server
firmware 5.51 or later is needed.
1. Make sure that the NDPS Gateway is not configured to
automatically create a public access printer, before you connect
the AXIS 560/660 to the network.
2. Connect the AXIS 560/660 to the NetWare network.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the NDS Tree.
4. Create a new Printer Agent (PA) or convert a Public Access
Printer to a Controlled one.
5. Choose the Axis Gateway configuration. Select TCP/IP or IPX as
transport protocol and complete required tasks.
6. You are now ready to print in your NDPS environment. Your
printer will appear as an NDS object in the Directory Tree and
will offer a full range of network security options.
Use the Novell Print Manager to install the controlled access printer
on a client workstation.
AXIS 560/660 User's Manual