Axis 560 User Manual page 136

Section 9: Management & Configuration
136
Exceptions
The print server
Even though the AXIS 560/660 is fully compatible with the HP
JetAdmin tool, the AXIS 560/660 behaves differently in certain
situations. The exceptions from the traditional HP JetAdmin
functionality are presented below.
HP JetAdmin considers the AXIS 560/660 as one print server,
concept independently on the number of supported ports. The effects of this
behavior are:
• You can change a printers port's properties from any of the AXIS
560/660 printer ports' property pages. This can not be done with
an HP print server.
• If you are performing a reset on one of the AXIS 560/660 printer
ports, all three ports will be reset.
• From each port you can view all print queues connected to the
print server and not only the queues connected to the specific
printer port. To be able to distinguish between the queues, they
must be named <queue_name>!<logical_printer_number>.
• The AXIS 560/660 printer ports have the same name. They are
only distinguished by suffixes. If you change the name on one of
the AXIS 560/660 printer ports, all three port names will be
changed. Note that the port names displayed in HP JetAdmin will
not change until one of the refresh commands in the Device
Refresh menu has been performed.
AXIS 560/660 User's Manual