Axis 560 User Manual page 23

23
AXIS 560/660 User's Manual Section 3: Basic Installation
To minimize signal noise, it is recommended that you use
Notes:
screened or foiled Media Type 3 cabling for 16 Mbps networks
and not standard UTP cabling.
The test page includes a list of the most important parameters,
including the network speed and the firmware version number.
Each AXIS 660 Print Server is pre-configured with a unique node
address that is identical to the serial number. The node address
can be changed using AXIS NetPilot, or any standard Web
browser. Please refer to Section 9 Management & Configuration,
on page 108, for more information.
The AXIS 660 uses high speed Centronics Communication. For
use with older printers not supporting high speed, this function
can be disabled by using AXIS NetPilot, or any standard Web
browser. Please refer to Section 9 Management & Configuration,
on page 108, for more information.