Oce Scanner Maintenance kit User Manual page 22

Use this option to start the Scanner
Launch Scanner maintenance
maintenance wizard which will guide you through the camera alignment and
calibration procedure.
These two options above are available if the Océ Scan and Scanner
Note:
maintenance have been previously installed on your computer.
Select this option to stop the SCANserver (see
Stop SCANserver
'SCANserver' on page 23).
Select this option to activate the SCANserver (see
SCANserver...
'SCANserver' on page 23).
Use this option to display the Océ Scanner Agent
Restore Océ Scanner Agent
main interface.
This option displays information about the version
About Océ Scanner Agent
of Océ Scanner Agent.
Use this option to exit the Océ Scanner Agent application. The scanner
Exit
icon is removed from your system tray.
22 Scanner Maintenance User Manual