Quick Menu - Oce Scanner Maintenance kit User Manual

Quick menu

The Océ Scanner Agent quick menu offers an easy way to initiate common
scanning actions and a direct link to other Océ applications.
To access the quick menu, right-click the Océ Scanner Agent icon on the
system tray (see 'Start Océ Scanner Agent' on page 12). The following menu
is displayed:
This submenu contains options related to the scanner
Advanced Options
interface and to the firmware installation.
Use this option to browse to the latest executable
Update Scanner Firmware...
install firmware file you obtained/downloaded and wish to update your scanner
with.
Use this option to refresh the list of scanners attached to
Refresh Scanner List
your USB, SCSI or FireWire interface after booting the PC. This option is
relevant if you have more than one scanner connected. Océ Scanner Agent will
automatically detect a single scanner. On multiple attachment configurations,
the first scanner will be detected automatically.
Use this option to redetect the scanner or detect a
Rescan Hardware Bus(es)
new scanner attached to your SCSI, USB or FireWire interface, after you boot
your system (only available for Windows 2000/XP).
Enables you to optimize your SCSI adaptor settings.
SCSI adaptor settings
The default Windows settings are not always optimal in relation to speed.
Often, you can gain better performance by enabling high performance values
automatically generated by Océ Scanner Agent.
Use this option to open the Océ Scan program.
Launch Océ Scan
Océ Scanner Agent 21