Repeatedly Playing Specific Measures Of A Track (Track Play Loop) - Korg TRITON Quick Start Manual

7 8
4 5
1 2
EXIT MENU 0
When you play the keyboard, you will hear the
3
drum program for track 1 of the template song.
Press the popup button located at the left of "Track
Select," and select Track 02: Bass. When you play
the keyboard, you will hear a bass sound.
The track you select here can be played from the
keyboard; when you record, your performance on
this track will be recorded (except for Multi REC or
Master Track).
Next select T03–T08 in order, and play them from
the keyboard. (The TRITON Extreme has sixteen
sequence tracks, but this template song specifies
only tracks 1–8.)
Use "Track Select" to select T03: Elec.Piano.
Press the SEQUENCER [START/STOP] key to play
back the preset pattern that you copied.
Play the keyboard while you listen to the drum pat-
tern.
Press the SEQUENCER [START/STOP] key to
stop, and press the [LOCATE] key to return to the
beginning of the song.
The location indicator will show 001:01.000.
Repeatedly playing specific measures of a
track (Track Play Loop)
Here's how to use Track Play Loop to repeatedly play
back a drum phrase.
A B
9 H I
6 8
LOCATE key
SEQUENCER
3 PAUSE REW
/10's HOLD ENTER LOCATE REC/WRITE
PROG BANK SMPL MOSS
COMBI BANK
C D E F
J K L M
PROG/COMBI BANK
6, 9, 10
ARPEGGIATOR
FF TEMPO GATE
120
START/STOP
40 240
Press the PlyLoop 1–8 tab to access the P0: Play/
4
REC, PlayLoop T01–08 page.
5
4
5 Check track 1 "Track Play Loop," leave "Loop Start
Measure" as it is, and set "Loop End Measure" to
008.
6 When you press the SEQUENCER [START/STOP]
key, the drum phrase will be played back repeat-
edly.
When the playback has repeated for the number of
measures in the song as specified by "Length" (the
power-on default is 64 measures), it will stop auto-
matically.
By using "Play Intro" you can begin the loop after add-
ing an introduction (
Track Play Loop will continue repeating for the number
of measures specified by "Length." If you want to limit
the number of repetitions or place other performance
data (e.g., a drum fill-in) in that track, you will need to
expand the pattern into actual performance data. Use
the page menu command "Repeat Measure" P5: Edit,
Track Edit page to specify the number of playback repe-
titions and expand the pattern as playback data. In the
sample illustration below, performance data will be cre-
ated to play measures 1–8 of track 1 for four times (i.e.,
32 measures). This is the same result as if you had
pressed OK a total of four times in Step 2b "Copy Pat-
☞
tern to Track" ( PG p.82)
GM
G
N
VELOCITY
SAMPLING
ON/OFF REC START/STOP
☞
PG p.62).
25