1.1
ZyAIR Hardware and Utility Installation
Follow the instructions in the Quick Installation Guide to install the ZyAIR Utility and driver and make
hardware connections.
1.2
Disable Windows XP Wireless LAN Configuration Tool
Windows XP includes a configuration tool for wireless LAN devices.
DO NOT use the Windows XP configuration tool and the ZyAIR Utility at the same
time. It is recommended you use the ZyAIR Utility to configure the ZyAIR.
There are two methods to disable the configuration tool in Windows XP after you install the ZyAIR Utility.
From ZyAIR Utility
Right-click on the ZyAIR Utility system tray icon and click Turn off zero configuration.
From the Wireless Network Connection Status Screen
Step 1.
Double-click on the network icon for the wireless connection in the system tray. If the icon is
not present, proceed to Step 2. Otherwise skip to Step 5.
Step 2.
If the icon for the wireless network connection is not in the system tray, click Start, Control
Panel and double-click on Network Connections.
Error! Reference source not found.
This chapter prepares you to using the ZyAIR Utility.
Figure 1-1 Windows XP: System Tray Icon
Figure 1-2 Windows XP: System Tray Icon
Getting Started
1-1
ZyAIR G-200 User's Guide
Chapter 1