Tools And Supplies Required - Hangar 9 Piper Cherokee Instruction Manual

Tools and Supplies Required

Adhesives
Thin CA (cyanoacrylate) glue
Thick CA (cyanoacrylate) glue
6-minute epoxy
12-minute epoxy
30-minute epoxy
Blue Locktite 242
Canopy glue
Tools
Drill
Drill bits: 1/16'', 5/32''
Small Phillips screwdriver
Medium Phillips screwdriver
Z-bend pliers
Pliers
Small round file
Razor saw
Moto-Tool with sanding drum
Hobby knife with #11 blade
Mixing stick
Epoxy brush 90-degree triangle
File
Sanding stick (medium or fine)
Medium sandpaper
Masking tape
Straight edge
Measuring device (e.g., ruler, tape measure)
Scissors
Paper towels
Wax paper
Rubbing alcohol
Felt tipped pen
Fuel tubing
Clips (e.g., clothespins, binder clips)
Radio packing foam
Antenna tube
4