Additional Equipment Required; Tools And Supplies Required - Hangar 9 J-3 Piper Cub Assembly Manual

Additional Equipment Required

Radio Equipment
4 Channels (minimum)
5 Standard Servos
Standard 450-650 mAh Receiver Battery Pack
Y-Harness
2 Servo Extensions
Recommended JR Systems
JR F400 FM
JR XF642FM/PCM
JR XP783
JR XP8103 FM/PCM

Tools and Supplies Required

Adhesives
Instant thin CA (cyanoacrylate) glue
Thick CA glue
CA remover/debonder
White canopy glue (e.g., R/C 56 or Formula 560)
6 minute epoxy
12 minute epoxy
30 minute epoxy
Blue Locktite 242
4
Engine Recommendations
.40-.46 2-Cycle Engines
.45-.55 4-Cycle Engines
Saito .50GK
Saito .56GK
Recommended 2-Cycle Engines
Thunder Tiger Pro .40
Thunder Tiger Pro .46
Webra Speed .40 Sport
Recommended 4-Cycle Engines
Saito .50GK
Saito .50
Saito .56GK
Saito .56
Tools
Drill
Drill bits: 1/4", 1/8", 1/16", 3/32"
Small and medium Phillips screwdrivers
Z-bend pliers
Needle nose pliers
Pliers
Small round file
Adjustable wrench
Razor saw
Heat gun
Moto-Tool with sanding drum
Hobby knife with #11 blade
Mixing stick
Epoxy brush
Thunder Tiger
Pro .40
1/16" x 36" music wire
Medium sandpaper
Masking tape
Straight edge
Measuring device
(e.g., ruler, tape measure)
Scissors
Paper towels
Wax paper
Rubbing alcohol
Pencil
Felt tipped pen
Fuel tubing (optional)
Hobby enamel paint: black, silver