Advertisement
Position handle bars
2.
You can tilt the handle bars. This influences
the distance from the handle bars to the upper
body. Determine your own most comfortable
position by using the bike.
To tilt the handle bars:
1. Slightly loosen the screw with an Allen key.
2. Put the handle bars in the desired position
and then tighten the screw very firmly again.
1.
Accessories
Depending on your order, you can use the accessories as described below.
Crank shortener
The crank shortener is fitted to the crank,
as illustrated. The pedal can then be fitted
[A]
into the crank shortener at two positions.
With the socketed screw (A) the crank
shortener should be aligned with the
crank.
2 assembly points pedal
User manual
Fun-2-Go 06.13
7
Advertisement
