Advertisement
Transporting a walker
To firmly attach a walker to the back of
the bike:
1. If possible, fold in the walker.
2. Loosen the star knob.
3. Pull the clamp up.
4. Place the walker with the upper bar in
the bracket [A].
5. Pull the clamp [3] down so that the
upper bar is closed in. Tighten the
star knob again.
To disassemble the rack, all screws
can be loosened with an Allan key.
Once they are loosened, all the pipes
can be taken out of the frame.
User manual
Fun-2-Go 06.13
4.
1.
3.
[A]
2.
13
Advertisement
