Advertisement
4
Connect the charger plug into the socket. The
red light on the charger will light up.
5
Depending on the battery level, the charging
time is about 4 hours. If the green light is on,
the battery is charged.
6
Once the battery is charged, pull the plug
from the socket first..
7
Then pull the connector from the battery.
8
Put the battery back in the holder of the cycle
and close the lock.
It is also possible to charge the battery while it is still in the holder.
When charging the battery, first connect the charging point and then insert
the plug into the socket!
After being charged, first disconnect the socket and only then remove the
charger from the tricycle!
After charging, always remove the charger cable from the battery.
Ensure that the battery is always is pushed straight into the holder.
User manual
Fun-2-Go 06.13
4.
17
Advertisement
