Mscs Instruction; Id Setting; Configuration Of Various Modes - Orion opm-4260 User Manual

5.4. MSCS Instruction

y Check "ALL PDP" to send data to all connected MPDP regardless of ID.
MPDP Control - Power On/Off
y In order to control power of specific MPDP, use "Power On/Off" button after selecting the specific MPDP.
Please wait for about 10 seconds after connecting power plug to MPDP
or it may not work properly.
In case MPDP does not work properly, please pull out the power plug
Caution
and reconnect the plug.

5.5. ID Setting

y ID of MSCS(Multi Screen Control System) is set automatically.
ID 1 ID 2
ID 4 ID 5
ID 7 ID 8
Example of MPDP ID Setting
(InputsignalisDVI,Configurationis3by3)
y
In order to transmit data to chosen MPDP, ID of Screen Configuration must be selected.
y Select ID using right button of mouse. Selected ID is displayed with red square box.
ID 3
ID 6
ID 9
25 25

5.6. Configuration of various modes

y You can configure various input sources as you want.
1
Select a desirable input Source in "Select Input"
 - Ex)Select"DVI"in"SelectInput"
2
Click desirable screen with left button of mouse then the screen would
be converted into DVI.
 - Clicktheleftmousebuttononthescreenthatyouwanttochange.Screenwillbeturnedinto
DVIinputscreen.
3
You can configure other screens in the same way.
 - SelectedscreenwouldbeconvertedintoDVD.
26 26
Infinitely expandable