Guidance For Users - Orion OLM-5510 User Manual

ORION

3. Guidance for Users

Input/Output Terminals
ID SELECT
PC
IN OUT
VIDEO
FAN STB PWR ON
➐ IN OUT
DVI-D
LAN
IN OUT
RS-232C
SVC IN OUT
➎
➑
※ The product shape may vary depending on the model.
MLCD
• Model Name : OLM-4610
• Voltage : AC~100 - 240V
• Current : Max. 3A
• Frequency : 50/60Hz
• Serial No :
CO., LTD.
Made in Korea
CAUTION
To prevent electric shock, Do not remove cover. RISK OF ELECTRIC SHOCK DO NOT OPEN
No user serviceable part inside Refer servicing
to qualified service personal.
ID SELECT
PC
IN OUT
VIDEO
FAN STB PWR ON
IN OUT
DVI-D
LAN IN OUT
RS-232C
SVC IN OUT
1.PC In / Out
➊
Analog RGB Signal,
D-sub 15pin
2.VIDEO
Composite Signal, BNC Jack
➋
3.DVI
Digital RGB Signal,
➌
DVI Single Link 24Pin
4.RS-232C
MLCD Control, Firmware
Upgrade, D-sub 9pin
➍
5.LAN
Ethernet Control, RJ45
6.Service Port
For the exclusive use of service
7.ID Switch
Set ID Switch
➏
8.AC Input
AC 100V ~240V, 50/60Hz
- 18 -
Set ID Switch Setting
• Example of ID Switch setting
- You can set ID with 3 rotary switches as shown in the following figure.
MLCD
• Model Name : OLM-4610
• Voltage : AC~100 - 240V
• Current : Max. 3A
• Frequency : 50/60Hz
• Serial No :
CO., LTD.
Made in Korea
CAUTION
To prevent electric shock, Do not remove cover. RISK OF ELECTRIC SHOCK DO NOT OPEN
No user serviceable part inside Refer servicing
to qualified service personal.
ID SELECT
IN
VIDEO
FAN STB PWR ON
IN
LAN
IN
RS-232C
SVC IN
※ When you set ID of MLCD set, power cable must be disconnected. If power cable is not
disconnected during ID setting, MLCD set may be operated with the previous ID and it may cause
abnormal behavior.
※ For stable operation, wait for at least 10 seconds prior to use MLCD control program after the first
AC power connection.
• LED Indication
LED Indication
FAN STB PWR ON
FAN STB PWR ON
FAN STB PWR ON
FAN STB PWR ON
FAN : Normal - LED Off, Abnormal - LED On
IF FAN LED is turned on, please check FANs.
MLCD
Infinitely Expandable
[MLCD ID 01]
100digit10digitsingledigit
PC
OUT
OUT
DVI-D
OUT
[MLCD ID 15]
OUT
100digit10digitsingledigit
ON OFF BLINKING
Description
No Power.
Insert power cord(Stand-By state)
Power On By MSCS.
The PWR ON LED blinks continually.
Power Off by MSCS Program.
(System ready).
- 19 -