Inserting An Lc-Lc Fibre Channel Cable Into An Sfp Module; Inserting An Lc-Lc Fibre Channel Cable Into An Installed Sfp Module - IBM TotalStorage DS4400 User Manual

4. Carefully insert that same end of the LC-LC cable into an SFP module that is
Figure 8. Inserting an LC-LC Fibre Channel cable into an SFP module
Figure 9. Inserting an LC-LC Fibre Channel cable into an installed SFP module
5. Remove the two protective caps from the other end of the LC-LC cable, as
8
IBM TotalStorage DS4400 Fibre Channel Storage Server: User's Guide
installed in a DS4400 Storage Server mini-hub. The cable connector is keyed to
ensure it is inserted into the SFP module correctly. Holding the connector, push
in the connector until it clicks into place.
Figure 9 shows an LC-LC Fibre Channel cable connecting into an SFP module
that is installed in a DS4400 Storage Server mini-hub.
SFP module
Fiber-optic
cable
shown in Figure 7 on page 7. Save the protective cap for future use.
2 G
b / s
1 G
b / s
!
2 G
b / s
1 G
b / s
O U
!
T
2 G
b / s
1 G
O U b / s
T
!
2 G
b / s
1 G
b / s
O U
T !
I N
O U
T
I N
I N
I N